Signals and Systems
Sampling
Practice questions from Sampling.
8
Total0
Attempted0
Correct0
IncorrectLet be any continuous-time periodic signal with period . It is sampled uniformly with a sampling period where , resulting in the discrete sequence , where is an integer.
Which one of the following statements is correct about ?
Sign in to see the solution
Log in to view the explanation, track your attempts, and keep your progress.
Sign in to UnlockA signal is sampled at and then passed through an ideal low pass filter having cut-off frequency of . The maximum frequency present in the filtered signal in is __________ (Round off to the nearest integer).
Sign in to see the solution
Log in to view the explanation, track your attempts, and keep your progress.
Sign in to UnlockThe output y(t) of the following system is to be sampled, so as to reconstruct it from its samples uniquely. The required minimum sampling rate is
Sign in to see the solution
Log in to view the explanation, track your attempts, and keep your progress.
Sign in to UnlockLet and be two signals whose Fourier Transforms are as shown in the figure shown below, In the figure, denotes the impulse response.
For the system shown above, the minimum sampling rate required to sample y(t), so that y(t) can be uniquely reconstructed from its samples, is
Sign in to see the solution
Log in to view the explanation, track your attempts, and keep your progress.
Sign in to UnlockFor the signal , the minimum sampling frequency (in Hz) satisfying the Nyquist criterion is _________.
Sign in to see the solution
Log in to view the explanation, track your attempts, and keep your progress.
Sign in to UnlockA sinusoid x(t) of unknown frequency is sampled by an impulse train of period 20ms. The resulting sample train is next applied to an ideal low pass filter with a cutoff at 25Hz. The filter output is seen to be a sinusoid of frequency 20Hz. This means that x(t) has a frequency of
Sign in to see the solution
Log in to view the explanation, track your attempts, and keep your progress.
Sign in to UnlockA band-limited signal with a maximum frequency of 5 kHz is to be sampled. According to the sampling theorem, the sampling frequency in kHz which is not valid is
Sign in to see the solution
Log in to view the explanation, track your attempts, and keep your progress.
Sign in to UnlockThe frequency spectrum of a signal is shown in the figure. If this signal is ideally sampled at intervals of 1ms. Then the frequency spectrum of the sampled signal will be
Sign in to see the solution
Log in to view the explanation, track your attempts, and keep your progress.
Sign in to Unlock

























